• Medical Device and Chemotherapy Cooling

    RIGID Plate Liquid Chiller works along with cold caps, the two parts are tightly fitting. The helmet-like hats are filled with a cold gel or liquid that you wear during chemotherapy infusions. The cooling system - plate chiller recirculates and cools the liquid loop. These devices have helped many people keep some or quite a bit of their hair when treated with chemotherapy that can cause hair loss.

     

    RIGID's plate liquid chiller is ultra-compact, lightest weight, and smallest size. It works as a scalp cooling system by narrowing the blood vessels beneath the skin of the scalp, which reduces the amount of chemotherapy medicine that reaches the hair follicles. With less chemotherapy medicine in the follicles, the hair may be less likely to fall out. The cold also decreases the hair follicles’ metabolic activity, making the cells divide more slowly and protect the follicles from chemotherapy.

    Plate Liquid Chiller

    Plate Liquid Chiller

     

    Tiny Heat Transfer System 12V/24V/48V DC  

    The Plate type chiller module is the circulatory cooling sub-system. It does not only facilitate installation but also assures end-users to have excellent cooling performance with a tiny DC refrigerated compressor. The miniature cooling unit can run on battery power supply, especially applies to the microclimate cooling device and provides extraordinary cooling capacity for the extremely hot environment and confined space.

    • 4 kgs/8.8lbs;
    • Size: 330x200x150mm;
    • Compact & portable liquid chiller;
    • Miniature dc compressor to enable peak performance.

    Do you have a problem with hot components in your design?

    Are you looking for a compact and portable cooling module for core cooling?

    RIGID Technology has developed unparalleled small and portable refrigeration condensing units for scalp cooling and cold cap medical devices.

    Nowadays, many engineers are facing the biggest challenges of compact and precise thermal management. The conventional scroll compressor is too big which isn't suitable for small devices and personal use. In the industry of compact and mobile refrigeration, there are no logical bits and bytes, nor industry qualification standards. Hence the design of a cooling system and the choice of the right technology, supplier, and products can only be based on knowledge and experience in those fields.


    RIGID plate liquid chiller is a circulatory cooling subsystem. It consists of a mini compressor with coolant, condenser and radiator, evaporator, driver board, and other refrigeration parts. The mini compressor cooling system is developed aim to satisfy the growing market that wants microclimate cooling systems. For all people undergoing chemotherapy who want to keep more than just their hair, RIGID small cooling system can integrate or assemble with your medical machine and equipment. We are building a revolutionary micro cooling cold cap system.

     
    • Commercial & Personal Cooling
    • Integrated design, easy installation
    • Large refrigeration capacity
    • Minimize weight & footprint & noise
    • Reliable & Energy efficient and very competitively price
    • Provide perfect performance where requests small footprint cooling solutions
    broken image

    RIGID Cooling System's Working Principle

    broken image

    Chemotherapy for Scalp Cooling

    P-Plate Liquid Chiller

    Apart from standard refrigeration condensing units, RIGID also customizes and tailor-made a compact cooling module to meet customer's specific requirements. We focus on client's costs and budgets, and always taking the necessary steps to boost their competitiveness. Plus, our team works directly with customers to provide custom refrigeration solutions and meet their specific requirements.

    broken image

    What's Plate Liquid Chiller and Features?

    Nowadays, The need for compact liquid cooling continues to increase in the medical and aesthetic industry. Active thermal management is very important for medical equipment and devices. The Plate Liquid Chiller and other miniature cooling modules are very well-received, such as patient body core temperature management, skin cooling, medical device cooling, and laboratory equipment cooling. Medical device manufacturers request highly efficient and small cooling systems that can be integrated into their systems. RIGID plate liquid chiller can run on battery power and it is portable.

    RIGID engineers know better about cooling medical devices. So our plate liquid chiller must be compact, quiet, effective, and often must be placed inside the chassis of the medical system to keep tangled wires and hoses off the floor and out of the way of practitioners. All these demands present unique challenges to engineers. Furthermore, these critical features make cooling units in these applications difficult. The good news is, RIGID R&D team has successfully developed a variety of compact cooling solutions including air cooling, liquid cooling and direct refrigeration systems are being used to meet these challenges.

    RIGID Plate-P liquid chiller module is a circulatory cooling subsystem. It consists of a mini compressor with R134A coolant, a condenser (radiator), an evaporator (heat exchanger), a filter drier (expansion device), a driver board, and other refrigeration parts.

    It is a challenge to design a compact cooling system (or thermal management) to better match medical devices. Thanks to RIGID R&D team of years of research and development, now there are a variety of solutions are available to ensure that devices meet critical cooling requirements. Apart from Plate Liquid Chiller, other small cooling systems from simple fans or liquid cooling to compact refrigeration systems can help meet these challenges. If you have any specific cooling demands, just feel free to contact us. Our engineers are easy-going and would love to work directly with you.

     

       Main Applications:

    • Laser X-Ray
    • Body Cooling
    • Electric Vehicle
    • Medical & Aesthetic
    • Precise Instrument
    • Electronics & Semiconductor
    • Laboratory Device & Life Sciences
    RIGID Compact Liquid Cooling Chiller ensure X-RAY Device performance
  • Miniature Compressor -The “Core” Power Emitting the Charm of Science and Technology

    Today, miniature dc refrigerated compressors are widely used by many small and portable cooling systems and small footprint countertop applications. RIGID mini BLDC rotary compressor is an ideal solution for the smallest refrigeration condensing unit.

    If your machine or system has restricted mounting space, then RIGID compact portable refrigeration units are your best choice. They are small, lightweight, and compact. Our standard products are designed with RIGID brand mini compressors. These dc compressors are designed in vapor compression technology and have less vibration and noise.

    The BLDC compressors can be widely applied to many thermal devices such as chillers, small coolers, medical cooling devices, and direct cooling systems for electronics. The patent drive board of these compressors can control the frequency of a swage wave signal and they can control the speed from 2000rmp-6500rmp. They have a greater cooling capacity, from 100W to 550W.

     

       Mini Compressor Features:

    • Mini compressors are available in 12V / 24V / 48V DC or AC power
    • They have a great power capacity from 100W to 550W
    • These are low vibration compressors, quietly running
    • They are designed with a sine wave controller for controlling vibration
    • These are highly efficient compressors that are lightweight and small
    • Mini compressors can be used for mobile and transport cooling applications
    RIGID miniature dc compressor
  • Contact RIGID TEAM